NSN 5306-01-012-0623 · NIIN 010120623 · FSC 5306
NO DASHES 5306010120623
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.565 AND INCHES MAXIMUM 0.615 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.450 AND INCHES MAXIMUM 1.480 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.338 AND INCHES MAXIMUM 0.358 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.521 AND INCHES MAXIMUM 0.531 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.092 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.312 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE STSBS002 CAGEC 98897 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STSBS002 CAGEC 98897 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |