NSN 5306-01-012-0621 · NIIN 010120621 · FSC 5306
NO DASHES 5306010120621
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.707 AND INCHES MAXIMUM 0.757 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.092 AND INCHES MAXIMUM 3.122 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.435 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.750 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.109 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.437 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.365 AND INCHES MAXIMUM 2.385 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6485 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |