NSN 5905-00-887-9471 · NIIN 008879471 · FSC 5905
NO DASHES 5905008879471
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.5 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0350 AND INCHES MAXIMUM 0.0450 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.0295 AND INCHES MAXIMUM 1.030 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 1.0890 AND INCHES MAXIMUM 1.0990 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -400.0 TO 400.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 40.0 AND KILOHMS 2ND SECTION 40.0 AND KILOHMS 3RD SECTION 20.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 5 AND 2ND SECTION 5 AND 3RD SECTION 3 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 2000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION 360 DEG COSINE AND 2ND SECTION 360 DEG COSINE AND 3RD SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 16 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -2.00 TO 2.00 AND 2ND SECTION -2.00 TO 2.00 AND 3RD SECTION -0.60 TO 0.60 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0890 AND INCHES MAXIMUM 1.0990 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 343.0 AND NOMINAL 347.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.0295 AND INCHES MAXIMUM 1.0300 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.135 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.089 AND INCHES MAXIMUM 1.099 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.490 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |