NSN 5905-00-912-3369 · NIIN 009123369 · FSC 5905
NO DASHES 5905009123369
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 55.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 214.0 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -1.0 TO 1.0 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 2 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -20.0 TO 20.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9663 AND INCHES MAXIMUM 0.9668 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.967 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0620 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.100 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 27.0 AND SINGLE SECTION 196.5 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 0.750 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.560 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.310 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.1005 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.03 TO 0.03 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.25 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0007 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.112 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 110.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 310.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 40.0 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.30 |
| AEDX | SHAFT STYLE |