NSN 5905-00-153-8235 · NIIN 001538235 · FSC 5905
NO DASHES 5905001538235
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9681 AND INCHES MAXIMUM 0.9686 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.375 AND INCHES MAXIMUM 1.593 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.932 AND INCHES MAXIMUM 0.975 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.047 AND INCHES MAXIMUM 1.125 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.124 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.656 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.666 AND INCHES MAXIMUM 0.812 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.440 AND INCHES MAXIMUM 1.562 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0720 AND INCHES MAXIMUM 1.0870 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| AEFY | SHAFT END PLAY | INCHES 0.002 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 172.5 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -150.0 TO 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 2500.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |