NSN 5905-00-075-0511 · NIIN 000750511 · FSC 5905
NO DASHES 5905000750511
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 150.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.20 TO 0.20 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 20.0 AND KILOHMS 2ND SECTION 4.0 AND KILOHMS 3RD SECTION 4.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0006 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9688 |
| AAVM | PILOT LENGTH | INCHES MAXIMUM 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.138 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 0.980 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0600 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.156 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -300.0 TO 300.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | ALL SECTIONS 400.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 12 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AEFY | SHAFT END PLAY | INCHES 0.002 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0600 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0670 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.156 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.120 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.700 |