NSN 5305-00-011-7653 · NIIN 000117653 · FSC 5305
NO DASHES 5305000117653
In Stock
SCREW,MACHINE
Screws
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.450 AND INCHES MAXIMUM 1.500 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.500 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.225 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 55000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 80.0 AND DEGREES MAXIMUM 82.0 |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-B-613 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-B-626 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-W-321 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Supersedes
This item replaces cancelled NIIN 004643202. An older drawing citing one of those numbers resolves here.