NSN 5305-01-495-9270 · NIIN 014959270 · FSC 5305
NO DASHES 5305014959270
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F18 E/F
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.848 AND INCHES MAXIMUM 0.878 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.358 AND INCHES MAXIMUM 0.365 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1105 AND INCHES MAXIMUM 0.1125 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.1540 AND INCHES MAXIMUM 0.1560 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGRE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO(125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 014696210. An older drawing citing one of those numbers resolves here.