NSN 5305-01-512-8325 · NIIN 015128325 · FSC 5305
NO DASHES 5305015128325
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F18 E/F
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.204 AND INCHES MAXIMUM 2.234 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.445 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1570 AND INCHES MAXIMUM 0.1600 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.2195 AND INCHES MAXIMUM 0.2225 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3110 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.313 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.885 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-PH13-8MO (125 KSI SHEAR),INCONEL 718 (125 KSI SHEAR),6AL-4V TITANIUM (95 KSI SHEAR) |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488,TYE II,CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |