NSN 5305-01-512-8373 · NIIN 015128373 · FSC 5305
NO DASHES 5305015128373
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18E/F
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.474 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.454 AND INCHES MAXIMUM 1.484 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.464 AND INCHES MAXIMUM 0.473 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.312 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.469 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5662 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |