NSN 5305-01-485-5710 · NIIN 014855710 · FSC 5305
NO DASHES 5305014855710
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18E, F/A-18F
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.578 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.891 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.524 AND INCHES MAXIMUM 0.531 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.374 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.578 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18E, F/A-18F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.313 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 8470 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |