NSN 5305-01-718-3311 · NIIN 017183311 · FSC 5305
NO DASHES 5305017183311
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: EA-18G
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.3729 AND INCHES MAXIMUM 0.3813 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.084 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.151 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 95000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | EA-18G |
| AASK | HEAD STYLE | |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE MATERIAL RESPONSE NAS4004 6AL-4V |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 76301-3-1169 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.830 AND INCHES MAXIMUM 0.860 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 0.739 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS-PH13-8MO 125 KSI SHEAR,INCONEL 718 125 KSI SHEAR,6AL4V TITANIUM 95 KSI SHEAR |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |