NSN 5990-01-151-8756 · NIIN 011518756 · FSC 5990
NO DASHES 5990011518756
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Application: 1005-01-100-4469
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0005 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6255 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.6240 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0550 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1205 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6140 AND INCHES MAXIMUM 0.6380 |
| AGAV | END ITEM IDENTIFICATION | 1005-01-100-4469 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 20.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 400.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 380.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 610.00 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 10.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.0000 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.6250 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | SIDE |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2325.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0250 AND INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2200.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 250.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.978 AND ROTOR TO STATOR MAXIMUM 0.982 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| CWMS | MOUNTING THREAD TOLERANCE CLASS | INTERNAL 2B |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 12 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 19200-11830865 |