NSN 5306-01-723-2705 · NIIN 017232705 · FSC 5306
NO DASHES 5306017232705
In Stock
BOLT,SHEAR
Bolts
Application: F-15EX
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.1615 AND INCHES MAXIMUM 1.1915 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.614 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.081 AND INCHES MAXIMUM 1.101 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.398 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.439 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.649 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S270 -ETHOD 1 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | OVERALL INCHES MINIMUM 0.9535 AND INCHES MAXIMUM 0.9635 |
| CSYT | CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SHEAR |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.5625 |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | OVERALL INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |