NSN 5306-01-219-9125 · NIIN 012199125 · FSC 5306
NO DASHES 5306012199125
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.526 AND INCHES MAXIMUM 0.576 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.536 AND INCHES MAXIMUM 1.566 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.247 AND INCHES MAXIMUM 0.287 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.383 AND INCHES MAXIMUM 0.389 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.575 AND INCHES MAXIMUM 0.585 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.055 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRHC | HOLE CONFIGURATION STYLE | |
| FEAT | SPECIAL FEATURES | THD HOLE IN TOP OF HEAD 0.138-32 UNJC-3B THD; INJECTION PORT 0.120 IN. LG,0.060 IN. WIDE IN UNTHD SHANK; DISTANCE FROM HEAD TO BEGINNING OF INJECTION PORT 0.460 IN. |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |