NSN 5305-01-536-8099 · NIIN 015368099 · FSC 5305
NO DASHES 5305015368099
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F 18 AIRCRAFT
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS4004, 6AL-4V, A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE NAS4004, 6AL-4V, A-S 4967 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREES REDUCED HEAD, GEAR DRIVE RECESS, 6AL-4V TITANIUM (95 KSI SHEAR) |
| FEAT | SPECIAL FEATURES | DOUBLE SHEAR STRENGTH, MINIMUM - 14,600 POUNDS |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY UNS R56400 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | F 18 AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.615 AND INCHES MAXIMUM 0.635 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.079 AND INCHES MAXIMUM 1.109 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.445 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.1570 AND INCHES MAXIMUM 0.1600 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.2195 AND INCHES MAXIMUM 0.2225 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 4230 |