NSN 5305-01-479-2544 · NIIN 014792544 · FSC 5305
NO DASHES 5305014792544
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.312 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.124 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.394 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.155 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.249 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.076 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.812 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.013 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS, SPECIAL THREAD LENGTH |
| MATT | MATERIAL | OVERALL ALUMINUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS 4004, 6AL-4V |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |