NSN 5905-00-946-6214 · NIIN 009466214 · FSC 5905
NO DASHES 5905009466214
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFY | SHAFT END PLAY | INCHES 0.0025 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.065 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.343 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.880 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.781 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07187-2504322 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| PRMT | PRECIOUS MATERIAL | GOLD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION TERMINAL BASE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.562 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 330.0 AND MAXIMUM 332.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 32.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 32.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.312 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 330.0 AND MAXIMUM 332.0 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CBBL | FEATURES PROVIDED | SHAFT SEAL |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -30.0 TO 30.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |