NSN 5305-00-372-8344 · NIIN 003728344 · FSC 5305
NO DASHES 5305003728344
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: AIRCRAFT PHANTOM F-4; AIRCRAFT HORNET F/A-18
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 FSC- 76301 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJD | THREAD CLASS | 3A |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT PHANTOM F-4; AIRCRAFT HORNET F/A-18 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.301 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.641 AND INCHES MAXIMUM 0.671 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Supersedes
This item replaces cancelled NIIN 002817809. An older drawing citing one of those numbers resolves here.