NSN 5305-00-354-6063 · NIIN 003546063 · FSC 5305
NO DASHES 5305003546063
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AASK | HEAD STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.395 AND INCHES MAXIMUM 0.435 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.302 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.431 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |