NSN 5305-00-395-3481 · NIIN 003953481 · FSC 5305
NO DASHES 5305003953481
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.428 AND INCHES MAXIMUM 1.448 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.564 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.064 AND INCHES MAXIMUM 2.094 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.666 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-455 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |