NSN 5305-01-717-4261 · NIIN 017174261 · FSC 5305
NO DASHES 5305017174261
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18A THRU D AIRCRAFT
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT AND O RING |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CSYM | SURFACE FINISH | HEAD MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE-ASSEMBLY,100 DEGREE C'SUNK SEALING HEAD,DOVETAIL SLOT,CRES(125 KSI FSU) |
| FEAT | SPECIAL FEATURES | O-RING IS MADE OF FLUOROSILICONE RUBBER PER ST7M251; OPERATING TEMPERATURE RANGE -70 DEGREES F TO +350 DEGREES F |
| MATT | MATERIAL | FASTENER STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | FASTENER PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1 OR 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-652C7 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 125.0 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.656 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.265 AND INCHES MAXIMUM 2.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.8812 AND INCHES MAXIMUM 0.8884 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.096 AND INCHES MAXIMUM 0.100 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.4365 AND INCHES MAXIMUM 0.4370 |
| AGAV | END ITEM IDENTIFICATION | F/A-18A THRU D AIRCRAFT |
| ABQZ | INTERNAL DRIVE STYLE |