NSN 5305-01-727-5710 · NIIN 017275710 · FSC 5305
NO DASHES 5305017275710
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F-15EX
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.456 AND INCHES MAXIMUM 0.508 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.045 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.9275 AND INCHES MAXIMUM 0.9475 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-100 DEGREE COUNTERSUNK, DOVETAIL SLOT, CRES (125 KSI FSU), IVD COATED |
| AAJD | THREAD CLASS | 3A |
| CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE H13-8-O CRES ER A-S 5629 |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| ABQJ | POINT STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-DTL-83488, TYE II, CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.3915 AND INCHES MAXIMUM 1.4215 |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |