NSN 5315-01-292-6413 · NIIN 012926413 · FSC 5315
NO DASHES 5315012926413
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AATR | SHANK LENGTH | INCHES NOMINAL 2.060 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.373 AND INCHES MAXIMUM 0.375 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.225 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.510 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES NOMINAL 0.104 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.200 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.050 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.245 |
| CRDY | FIRST END LOCATION | SHORT SHANK END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHOULDER OUTSIDE DIAMETER MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | SHORT SHANK END MICROINCHES 63.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.660 |
| MATT | MATERIAL | OVERALL STEEL COMP 630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-24111 TYE TWO,CONDITION TWO,FINISH A |
| STYL | STYLE DESIGNATOR |