NSN 2530-00-353-2538 · NIIN 003532538 · FSC 2530
NO DASHES 2530003532538
In Stock
CAMSHAFT,ACTUATING,BRAKE SHOE
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 1085 |
| AYSS | CAM LOCATION | ON END |
| AYSW | CAM SHAPE | S |
| ABRY | LENGTH | INCHES NOMINAL 1.688 |
| ABSA | SPLINE QUANTITY | 10 |
| ABWV | SHAFT DIAMETER | FIRST STEP INCHES NOMINAL 1.438 |
| ABWV | SHAFT DIAMETER | SECOND STEP INCHES MINIMUM 1.493 AND INCHES MAXIMUM 1.495 |
| AYTA | CAM CENTER THICKNESS | INCHES NOMINAL 1.375 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633, FS1085-CANCELED |
| AAZR | MAJOR DIAMETER | INCHES MINIMUM 1.456 AND INCHES MAXIMUM 1.466 |
| ABGJ | STEP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 0.125 AND INCHES NOMINAL 4.375 AND INCHES NOMINAL 6.562 |
| AYTK | SHAFT SHANK TYPE | PLAIN |
| FEAT | SPECIAL FEATURES | 2 SQ HOLES ON FIRST SHOULDER 2.500 FROM END OF CAM,0.625 IN. BY 0.625 IN.,0.625 IN. APART,1 HOLE DRILLED ON PLAIN SHANK,0.266 IN. DIA,0.250 IN. FROM END TO CENTER OF HOLE,0.062 IN. BY 45 DEG CHAMFER ON SHANK END |
| AATR | SHANK LENGTH | INCHES NOMINAL 0.500 |
| AYSY | ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| AYSZ | CAM OVERALL LENGTH | INCHES NOMINAL 1.750 |
| AKCV | DRIVE TYPE | STRAIGHT SPLINE |
| AGEX | CAM QUANTITY | 1 |
| AGJR | MINOR DIAMETER | INCHES MINIMUM 1.140 AND INCHES MAXIMUM 1.145 |
| AGEN | CAM WIDTH | INCHES NOMINAL 1.125 |
| ADCS | PLAIN SHANK DIAMETER | INCHES NOMINAL 1.000 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 16.812 |
| ABWV | SHAFT DIAMETER | THIRD STEP INCHES NOMINAL 1.469 |