NSN 5990-00-501-2097 · NIIN 005012097 · FSC 5990
NO DASHES 5990005012097
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0930 AND INCHES MAXIMUM 0.1030 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9500 AND INCHES MAXIMUM 0.9800 |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 235.00 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 0.080 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 15.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1630.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1400.00 |
| AJTY | ZCO RESISTANCE IN OHMS | NOMINAL 370.00 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.1200 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0560 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 14.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.07 |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.6000 AND INCHES MAXIMUM 2.2000 |
| CQTM | TERMINAL LOCATION | REAR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 15.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 22.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 160.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 580.00 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0620 AND INCHES MAXIMUM 0.0680 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1050 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7930 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 12 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 370.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 415.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 225.00 |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | NOMINAL 0.08 |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | NOMINAL 1400.00 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES NOMINAL 0.1050 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6730 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLATTED |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9682 AND INCHES MAXIMUM 0.9687 |
Supersedes
This item replaces cancelled NIIN 009329326. An older drawing citing one of those numbers resolves here.