NSN 5990-00-481-7208 · NIIN 004817208 · FSC 5990
NO DASHES 5990004817208
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0670 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 378.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 296.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 5.000 AND INPUT TO OUTPUT MAXIMUM 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 10.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 12 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0001 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.5750 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MINIMUM 0.6130 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 135.0 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 693.00 AND MAXIMUM 847.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.5160 AND INCHES MAXIMUM 2.5480 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7520 AND INCHES MAXIMUM 1.8700 |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 1629.00 AND MAXIMUM 1991.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |