NSN 5905-00-001-2573 · NIIN 000012573 · FSC 5905
NO DASHES 5905000012573
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 4 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.9825 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.354 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 0.875 |
| AAQL | BODY STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.00 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 4.000 AND KILOHMS 2ND SECTION 4.000 AND KILOHMS 3RD SECTION 4.000 AND KILOHMS 4TH SECTION 4.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 160.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.74950 AND INCHES MAXIMUM 0.75000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.174 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.06000 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06000 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -10.0 TO 10.0 AND 2ND SECTION -10.0 TO 10.0 AND 3RD SECTION -10.0 TO 10.0 AND 4TH SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.87500 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19315-1981405 |
| AEDX | SHAFT STYLE |