NSN 5305-01-542-5726 · NIIN 015425726 · FSC 5305
NO DASHES 5305015425726
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.373 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.133 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.526 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.276 |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, NAS1800 SIX LOBE RECESS, 95KSI FSU |
| FEAT | SPECIAL FEATURES | SIX LOBE RECESS PER NAS1800 |
| SPCL | SPECIAL TEST FEATURES | MATERIAL: CRES - A286 (UNS S66286) CONFORMING TO THE CHEMISTRIY OF AMS5731, AMS5732, AMS5737 OR AMS5853; HEAT TREATMENT: 160-190KSI STU, PRECIPITATION HARDENING PER AMS5853 OR AMS2759; FINISH: CADMIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE UNS S66286 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--416, TYE II, CLASS 2 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 95000 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |