NSN 5305-01-520-9404 · NIIN 015209404 · FSC 5305
NO DASHES 5305015209404
In Stock
SCREW,MACHINE
Screws
Application: MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL)
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.769 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.875 |
| AASK | HEAD STYLE | |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.223 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 5820 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,100 DEGREE FLUSH HEAD, FULL THREAD, 6 LOBE RECESS |
| CYAU | SCREW MATERIAL | IRON ALLOY 660 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |