NSN 5305-01-520-9395 · NIIN 015209395 · FSC 5305
NO DASHES 5305015209395
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL)
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.260 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.901 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.380 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.189 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.163 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | MV-22 AIRCRAFT (V-22 LRIP 1 E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 3180 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, FLAT 100 DEG HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU |
| FEAT | SPECIAL FEATURES | THIS SCREW IS INTENDED FOR APPLICATIONS WHICH REQUIRE THE SIX LOBE RECESS; HAS UNDRILLED SHANK |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE A-S5731 OR FED SPEC 2ND MATERIAL RESPONSE A-S5732 OR FED SPEC 3RD MATERIAL RESPONSE A-S5737 OR FED SPEC 4TH MATERIAL RESPONSE A-S5853 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE A-S-QQ--416, TYE 2, CLASS 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |