NSN 5305-01-530-2414 · NIIN 015302414 · FSC 5305
NO DASHES 5305015302414
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.338 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.385 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.155 |
| AAUM | LOCKING FEATURE | LOCKING FEATURE PATCH |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S-QQ--35 OR CADIU- LATE ER A-S-QQ--416, TYE II, CLASS 3. |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, CLOSE TOLERANCE. |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.500 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.838 |
| FEAT | SPECIAL FEATURES | END SHALL BE FLAT AND CHAMFERED PLUS INCOMPLETE THREAD NOT TO EXCEED TWO PITCHES. |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A286 CONFOR-ING TO THE CHE-ISTRY OF A-S5731, A-S5732, A-S5737, OR A-S5853 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR PASSIVATE |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.189 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 3180 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.189 |