NSN 5305-00-638-8698 · NIIN 006388698 · FSC 5305
NO DASHES 5305006388698
In Stock
SETSCREW
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 3140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.500 |
| AAUY | POINT LENGTH | INCHES MINIMUM 0.119 AND INCHES MAXIMUM 0.163 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.238 AND INCHES MAXIMUM 0.242 |
| ABQJ | POINT STYLE | |
| CFSG | NONSTANDARD THREAD PITCH DIAMETER | INCHES 0.2840 TO 0.2870 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.149 AND INCHES MAXIMUM 0.163 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.372 AND INCHES MAXIMUM 0.564 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.847 AND INCHES MAXIMUM 0.871 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ABQZ | INTERNAL DRIVE STYLE |
Supersedes
This item replaces cancelled NIIN 003607012. An older drawing citing one of those numbers resolves here.