NSN 5305-01-020-5921 · NIIN 010205921 · FSC 5305
NO DASHES 5305010205921
In Stock
SCREW,MACHINE
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.312 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.281 AND INCHES MAXIMUM 0.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.140 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.055 AND INCHES MAXIMUM 0.062 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.031 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.086 |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE A-S 5616 |
| CYBA | SCREW SURFACE TREATMENT | OXIDE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-13924,CL 4 |
| CYBG | HEAD HOLE CONFIGURATION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND STYLE 5S |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SURFACE TREATMENT |