NSN 5320-00-959-7214 · NIIN 009597214 · FSC 5320
NO DASHES 5320009597214
In Stock
PIN-RIVET
Rivets
Application: ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P);ENGINE, AIRCRAFT, J-57 ALL MODELS (C-135, EC-135, B-52);AIRCRAFT, SOF ( AC-130H, MC-130H, EC-130E,HC-130);HELICOPTER, SEARCH AND RESCUE, HH-60H;ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H);AIRCRAFT, C-2A (REPROCURED);HELICOPTER, MH-53E;ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B);HELICOPTER, CARRIER BASED ASW, SH-60F.
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.295 AND INCHES MAXIMUM 0.315 |
| AGAV | END ITEM IDENTIFICATION | ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P);ENGINE, AIRCRAFT, J-57 ALL MODELS (C-135, EC-135, B-52);AIRCRAFT, SOF ( AC-130H, MC-130H, EC-130E,HC-130);HELICOPTER, SEARCH AND RESCUE, HH-60H;ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H);AIRCRAFT, C-2A (REPROCURED);HELICOPTER, MH-53E;ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B);HELICOPTER, CARRIER BASED ASW, SH-60F. |
| ANEE | GRIP LENGTH | INCHES MAXIMUM 0.193 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.503 AND INCHES MAXIMUM 0.523 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 95000 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6049 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6758 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.079 AND INCHES MAXIMUM 0.080 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| AAZF | SHANK STYLE |
Supersedes
This item replaces cancelled NIINs 014786594 · 006309446 · 008646054 · 012016380. An older drawing citing one of those numbers resolves here.