NSN 5305-01-052-9112 · NIIN 010529112 · FSC 5305
NO DASHES 5305010529112
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.348 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.746 AND INCHES MAXIMUM 0.776 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.325 AND INCHES MAXIMUM 0.385 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.448 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 49.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE NAS 672 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 011074056. An older drawing citing one of those numbers resolves here.