NSN 5305-01-706-5519 · NIIN 017065519 · FSC 5305
NO DASHES 5305017065519
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F16
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.750 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AGAV | END ITEM IDENTIFICATION | F16 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2495 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND LUBRICANT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-C-83488 TYE II,CLASS 3 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-L-46010,TYE I ALIED OVER ALU-INU- COATING |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.370 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.105 AND INCHES MAXIMUM 1.135 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MAXIMUM 0.507 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.015 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 132000 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100.0 DEGREE FLUSH HEAD,TORQ-SET RECESS,132.0 KSI SH |