NSN 5305-01-692-5440 · NIIN 016925440 · FSC 5305
NO DASHES 5305016925440
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.447 AND INCHES MAXIMUM 0.507 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.108 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 132000 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.500 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEG FLUSH HEAD,TORQ-SET RECESS,132 KSI SHEAR |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.855 AND INCHES MAXIMUM 0.885 |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| MATT | MATERIAL | OVERALL STEEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE ION VAOR DEOSITED ALU-INU- COATING ER -IL-C-83488,TY II,CL 3 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-L-46010,TY I |
| AAJD | THREAD CLASS | 3A |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 32.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE H11 ALLOY STEEL ER A-S6487 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.370 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND LUBRICANT |