NSN 5305-01-682-7125 · NIIN 016827125 · FSC 5305
NO DASHES 5305016827125
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F16
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.3125 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.403 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.7155 |
| AASK | HEAD STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6487 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488, TYE 2, CLASS 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.399 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2641 AND INCHES MAXIMUM 0.2651 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 3740 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F16 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT |
| CMLP | THREAD QUANTITY PER INCH | 28 |