NSN 5305-01-693-4053 · NIIN 016934053 · FSC 5305
NO DASHES 5305016934053
In Stock
SCREW,MACHINE
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.00 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S-6487 |
| AASL | HEAD DIAMETER | INCHES MAXIMUM 0.399 |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83488 TYE II, CLASS 3 |
| CYBA | SCREW SURFACE TREATMENT | ALUMINUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREES REDUCED HEAD, TORQ-SET OR HEX RECESS, 1 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 46.0 AND ROCKWELL C MAXIMUM 50.0 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| FEAT | SPECIAL FEATURES | GRIP DIAMETER IS |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.375 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.778 |
| AASK | HEAD STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.063 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CYAU | SCREW MATERIAL | STEEL COMP H11 |