NSN 3020-01-484-2526 · NIIN 014842526 · FSC 3020
NO DASHES 3020014842526
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Application: AIRCRAFT CARRIER, CVN74
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT CARRIER, CVN74 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.0000 |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.250 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | FIRST END INCHES 0.250 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | FIRST END INCHES 0.688 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.750 |
| FEAT | SPECIAL FEATURES | PART OF AIRCRAFT CARRIER ELEVATOR DOOR LOCKING MECHANISM. 0.125 IN. DIA. HOLE DRILLED AT ASSEMBLY THROUGH HUB FOR ROLL PIN |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-741 |
| STYL | STYLE DESIGNATOR |