NSN 5970-01-003-3084 · NIIN 010033084 · FSC 5970
NO DASHES 5970010033084
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJH | TEMP RATING | LOCATION NOT OTHERWISE SPECIFIED CELSIUS -55.0 |
| ADZC | ENVIRONMENTAL PROTECTION | LOCATION NOT OTHERWISE SPECIFIED CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| AGAB | MAIN BODY WALL THICKNESS | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.070 |
| AGAH | MAIN BODY OVERALL LENGTH | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 2.640 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.220 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.280 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.710 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 1.220 |
| AGAL | DISTANCE FROM BOTTOM OF SHOULDER TO LARGE END OF MAIN BODY | AS SUPPLIED INCHES NOMINAL 1.380 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.710 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| FEAT | SPECIAL FEATURES | TAB LOCATED BETWEEN EXTERIOR SMALL DIA AND LARGE DIA WITH HOLE 0.080 IN. DIA; INSIDE DIA HAS LIPS; WALL THICKNESS ON SMALL END TAPERS TO 0.040 IN. |
| FLEX | FLEXIBILITY | SEMIRIGID |
| HUES | COLOR | BLACK |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MFR REF SINGLE MATERIAL RESPONSE RT-301, RAYCHE- COR |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
Supersedes
This item replaces cancelled NIIN 011610129. An older drawing citing one of those numbers resolves here.