NSN 3130-01-063-5845 · NIIN 010635845 · FSC 3130
NO DASHES 3130010635845
In Stock
HOUSING,BEARING UNIT
Bearings, Mounted
Application: 2350-01-087-1095 TANK,ARMORED,BATTLE,M1A1
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 10.875 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.620 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 5.9975 AND INCHES MAXIMUM 5.9990 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 12.250 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 5.880 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 3.120 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 TANK,ARMORED,BATTLE,M1A1 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CTTC | THREAD TOLERANCE CLASS | INTERNAL 2B |
| CWJW | MOUNTING HOLE TYPE | ROUND, THREADED |
| FEAT | SPECIAL FEATURES | BURRS AND SHARP EDGES REMOVED. QUENCHED AND TEMPERED TO HARDNESS 32/38 RC. THREADED MOUNTING HOLES FOR 2 EA 180 DEG APART. PERIPHERAL FLATS FOR 2 EA 180 DEG APART. RADII FOR 4 EA 90 DEG APART LOCATED AT INSIDE DIA TO DEPTHOF 0.310 IN NOM |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19207-12274444 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |