NSN 5306-01-706-9783 · NIIN 017069783 · FSC 5306
NO DASHES 5306017069783
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F/A-18 C/D
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.257 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.436 AND INCHES MAXIMUM 0.437 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | OVERALL INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ASXK | HOLE QUANTITY | 1 |
| AAUM | LOCKING FEATURE | FIRST HOLE RETAINER |
| ABQJ | POINT STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18 C/D |
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.599 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 4.099 |
| AASK | HEAD STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,CLOSE TOLERANCE,DRILLED SHANK |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.4375 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | OVERALL INCHES MINIMUM 3.981 AND INCHES MAXIMUM 3.991 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| AAZH | HEAD MINOR DIAMETER | INCHES NOMINAL 0.714 |
| BQDM | HOLE TYPE | DRILLED |
| ANEE | GRIP LENGTH | INCHES MINIMUM 3.490 AND INCHES MAXIMUM 3.510 |
| CMLP | THREAD QUANTITY PER INCH | 20 |