NSN 3120-00-227-5868 · NIIN 002275868 · FSC 3120
NO DASHES 3120002275868
In Stock
BEARING,SLEEVE
Bearings, Plain, Unmounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZLX | CORNER SHAPE | LEFT FLANGE BODY CORNER UNDERCUT |
| BZLX | CORNER SHAPE | INSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | INSIDE LEFT CORNER SQUARE |
| BZLX | CORNER SHAPE | LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.7920 AND INCHES MAXIMUM 0.8120 |
| AGFF | FLANGE WIDTH | INCHES MINIMUM 0.0575 AND INCHES MAXIMUM 0.0625 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF BODY MICROINCHES 125.0 |
| CSYM | SURFACE FINISH | RIGHT END SURFACE OF LEFT FLANGE MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | PLASTIC /TETRAFLUOROETHYLENE/ LINER BONDED TO LEFT FLANGE FACE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER LAYER FED STD 1ST MATERIAL RESPONSE 66,AISI 410 TO SAE 51410 OR FED STD 2ND MATERIAL RESPONSE 66,AISI 416 TO SAE 51416 OR ASSN STD 3RD MATERIAL RESPONSE A-S 5643 |
| STYL | STYLE DESIGNATOR | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.2975 AND INCHES MAXIMUM 0.3125 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.4381 AND INCHES MAXIMUM 0.4386 |
| ADAS | BODY INSIDE DIAMETER | INCHES MINIMUM 0.3130 AND INCHES MAXIMUM 0.3140 |
| CQFM | HARDNESS RATING | OUTER LAYER ROCKWELL C MINIMUM 27.0 AND ROCKWELL C MAXIMUM 32.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF BODY MICROINCHES 63.0 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER SURFACE OF FLANGE MICROINCHES 125.0 |
| BZLX | CORNER SHAPE | OUTSIDE RIGHT CORNER SQUARE |
| BZLX | CORNER SHAPE | OUTSIDE LEFT CORNER SQUARE |
Supersedes
This item replaces cancelled NIIN 004538367. An older drawing citing one of those numbers resolves here.