NSN 3120-01-338-7420 · NIIN 013387420 · FSC 3120
NO DASHES 3120013387420
In Stock
BEARING,PLAIN,ROD END
Bearings, Plain, Unmounted
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZF | SHANK STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.5050 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.3745 AND INCHES MAXIMUM 0.3765 |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | INCHES MAXIMUM 1.1300 |
| AGGG | BORE CENTER TO SHANK END DISTANCE | INCHES NOMINAL 1.9400 |
| AGGH | OUTER MEMBER WIDTH | INCHES MINIMUM 0.4000 AND INCHES MAXIMUM 0.4200 |
| AGGJ | INNER MEMBER WIDTH | INCHES MINIMUM 0.4950 AND INCHES MAXIMUM 0.5000 |
| AGGY | SHANK THREAD LENGTH | INCHES NOMINAL 1.2500 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | RACE INSERT ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 37.0 |
| CQFM | HARDNESS RATING | ROD END BODY ROCKWELL C MINIMUM 33.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQFM | HARDNESS RATING | INNER MEMBER ROCKWELL C MINIMUM 56.0 AND ROCKWELL C MAXIMUM 63.0 |
| MATT | MATERIAL | INNER MEMBER STEEL COMP E52100 OR STEEL COMP 440C |
| MATT | MATERIAL | RACE INSERT STEEL COMP 410 OR STEEL COMP 630 |
| MATT | MATERIAL | ROD END BODY STEEL OR STEEL COMP 630 OR STEEL COMP 631 |
| MATT | MATERIAL | LUBRICATION LUBRICANT DRY FILM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LUBRICATION MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-46010 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER MEMBER MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7420 OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-763 OR ASSN STD 1ST MATERIAL RESPONSE A-S 6440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ROD END BODY MIL SPEC 1ST MATERIAL RESPONSE -IL-S-46172 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5643 OR ASSN STD 3RD MATERIAL RESPONSE A-S 5644 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RACE INSERT FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 OR FED SPEC 1ST MATERIAL RESPONSE QQ-S-766 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5643 |
| SFTT | SURFACE TREATMENT | ROD END BODY CADMIUM AND CHROMATE AND ZINC AND CHROMATE |
| SFTT | SURFACE TREATMENT | INNER MEMBER CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | INNER MEMBER FED SPEC SINGLE TREATMENT RESPONSE QQ-C-320 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ROD END BODY FED SPEC 1ST TREATMENT RESPONSE QQ--416,TYE 2,CLASS 3 OR ASSN STD 2ND TREATMENT RESPONSE AST- B633 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |