NSN 5305-01-356-7209 · NIIN 013567209 · FSC 5305
NO DASHES 5305013567209
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.345 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.642 AND INCHES MAXIMUM 0.672 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.338 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1885 AND INCHES MAXIMUM 0.1895 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.302 AND INCHES MAXIMUM 0.322 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | FASTENER IRON ALLOY 660 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FASTENER ASSN STD 1ST MATERIAL RESPONSE A-S5737 OR ASSN STD 2ND MATERIAL RESPONSE A-S5731 |
| SFTT | SURFACE TREATMENT | FASTENER PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FASTENER FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |