NSN 4320-00-293-7333 · NIIN 002937333 · FSC 4320
NO DASHES 4320002937333
In Stock
MOTOR,HYDRAULIC
Power and Hand Pumps
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLANGE |
| ABUJ | THREAD SIZE | 0.250-11-1 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 1.9995 AND INCHES MAXIMUM 2.0000 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 1500.0 |
| AJAB | DRIVE SHAFT TYPE | TONGUE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 15.500 |
| AZFG | MOUNTING BOLT HOLE SPACING | 30 DEG AND 60 DEG ALTERNATE SPACING ON 5.500 IN. DIA BOLT CIRCLE |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.500 |
| ABTJ | MOUNTING HOLE QUANTITY | 8 |
| FEAT | SPECIAL FEATURES | 1/2 IN.-13 UNC TAPPED MTG HOLES |
| MATT | MATERIAL | HOUSING IRON CAST |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 500.0 |
| AWLS | CONNECTION TYPE | THIRD END DRAIN |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2000 PSI |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES MINIMUM 4.281 AND INCHES MAXIMUM 4.343 |
| AWLS | CONNECTION TYPE | FIRST END OUTLET |
| AWLS | CONNECTION TYPE | SECOND END OUTLET |
| AJYP | SCREW THREAD SERIES DESIGNATOR | NPT |
| APJC | THREAD LOCATION | OVERALL INTERNAL |