NSN 5315-00-075-3786 · NIIN 000753786 · FSC 5315
NO DASHES 5315000753786
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPW | THIRD STEP LENGTH | INCHES NOMINAL 0.593 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABPV | THIRD STEP DIAMETER | INCHES MINIMUM 0.4360 AND INCHES MAXIMUM 0.4370 |
| ABPU | SECOND STEP LENGTH | INCHES MINIMUM 1.880 AND INCHES MAXIMUM 1.890 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPS | FIRST STEP LENGTH | INCHES NOMINAL 0.187 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6145 AND INCHES MAXIMUM 0.6155 |
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.4375 |
| CRDY | FIRST END LOCATION | SHOULDER END |
| FEAT | SPECIAL FEATURES | LUBRICATION FITTING MS15001-4 IS ATTACHED BY MOUNTING IN 0.250-28UNF-2B CLASS FIT BY 0.125 INCHES NOMINAL DEPTH DRILLED THREADED HOLE ON LARGE SHOULDER END; ON LONGITUDINAL CENTER LINE DRILLED 0.062 INCHES MIN 0.065 INCHES MAX DIAMETER THROUGH ONE WALL ONLY; G41-20 THREAD RELIEF UNDERCUT ON FIRST SHANK 0.359 INCHES MIN 0.369 INCHES MAX DIAMETER |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.180 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.104 AND INCHES MAXIMUM 0.111 |