NSN 4720-00-842-8240 · NIIN 008428240 · FSC 4720
NO DASHES 4720008428240
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.156 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 1.594 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.758 AND INCHES MAXIMUM 0.812 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.156 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.205 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.156 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 28.000 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.156 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.297 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.594 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 1.594 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.594 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CTCJ | FLANGE STYLE | |
| AECS | BOLT HOLE QUANTITY | 4 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |